Exterior elements of car body VAZ-2107
Description of the body structure
The car body is a four-door sedan, all-metal, welded, load-bearing structure (frameless). The body frame consists of the following main elements: the front of the body, front...
The car body is a four-door sedan, all-metal, welded, load-bearing structure (frameless). The body frame consists of the following main elements: the front of the body, front...
Body — cleaning drainage holes and lubricating rubbing parts
Cleaning of drainage holes and lubrication of rubbing parts must be performed according to the maintenance schedule every 10,000 km. To complete the job, you will need a thin...
Cleaning of drainage holes and lubrication of rubbing parts must be performed according to the maintenance schedule every 10,000 km. To complete the job, you will need a thin...
Radiator Trim — Removal and Installation
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. To remove the radiator trim, use a Phillips screwdriver to unscrew the six...
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. To remove the radiator trim, use a Phillips screwdriver to unscrew the six...
Hood — removal and installation
An assistant will be needed to complete the job. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Open the hood. 3. Using...
An assistant will be needed to complete the job. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Open the hood. 3. Using...
Hood lock and lock drive cable — removal and installation
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Mark the position of the lock relative to the body bracket. 3. Using a...
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Mark the position of the lock relative to the body bracket. 3. Using a...
Front bumper — removal and installation
We remove the bumper to replace its parts or to perform body repairs on the front of the car. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance...
We remove the bumper to replace its parts or to perform body repairs on the front of the car. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance...
Rear bumper — removal and installation
We remove the bumper to replace its parts or perform body repairs on the rear of the car. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and...
We remove the bumper to replace its parts or perform body repairs on the rear of the car. Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and...
Mudguard — Removal and Installation
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Using an 8 mm socket wrench, unscrew the four screws A side...
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Using an 8 mm socket wrench, unscrew the four screws A side...
Windshield Washer Reservoir — Refilling Fluid Level
The windshield washer reservoir on a car with a carburetor engine is located in the engine compartment on the left side (on a car with an injection engine - on the right side) and...
The windshield washer reservoir on a car with a carburetor engine is located in the engine compartment on the left side (on a car with an injection engine - on the right side) and...
Windshield Wiper Blades — Replacement
If the rubber of the wiper blade has lost its elasticity or cracked, the wiper blades must be replaced. To ensure driving safety, it is recommended to replace the wiper blades at...
If the rubber of the wiper blade has lost its elasticity or cracked, the wiper blades must be replaced. To ensure driving safety, it is recommended to replace the wiper blades at...
Outside rear view mirror — removal and installation
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Lower the door glass and use a Phillips screwdriver to unscrew the screw...
Removal 1. Prepare the vehicle for operations (see " Preparing a car for maintenance and repair "). 2. Lower the door glass and use a Phillips screwdriver to unscrew the screw...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ Body: Exterior VAZ-2110 (1995-2007)
➠ Body: Exterior VAZ-2114 (2004-2013)
➠ Body: Exterior VAZ-21214 (1994-2006)
➠ Body: Exterior VAZ-21061 (1976-2006)
➠ Body: Exterior VAZ-21011 (1974-1983)
➠ Body: Exterior VAZ-2110 (1995-2007)
➠ Body: Exterior VAZ-2114 (2004-2013)
➠ Body: Exterior VAZ-21214 (1994-2006)
➠ Body: Exterior VAZ-21061 (1976-2006)
➠ Body: Exterior VAZ-21011 (1974-1983)
Share with friends:
- General information
- User manual
- Maintenance
- Operation and maintenance
- Power unit
- Engine repair
- Fuel system (carburetor)
- Fuel system (injector)
- Control system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Wheels and tires
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and glass
- Electrical equipment
- Equipment and devices
- Headlights and lighting
- Engine electrics

