All articles describing everyday functions for the daily operation of the VAZ-2107 Zhiguli car and its modifications.
Introduction to the car owner's manual The manual mainly describes the VAZ-2107 car, and the design features of the VAZ-21072 and VAZ-21074 cars are given in a separate chapter. VAZ-2107 is a five-seater, comfortable,...
General recommendations for car operation Please read this manual carefully before operating your vehicle. Compliance with the following rules will contribute to a more complete manifestation of the performance of the car...
Vehicle identification numbers Summary plate of factory data (pic. 1) mounted on the bottom shelf of the air intake box. It indicates the engine model, spare part number, year of manufacture, manufacture...
Main operating parameters and dimensions Number of seats, including the driver's seat - 5 Useful weight, including 50 kg of cargo in the trunk, kg - 400 Dry weight (weight of unfilled and unloaded vehicle), kg - 965 Own...
Car keys Each car comes with two sets of keys. In each set (pic. 3) two keys each: a longer one for turning on the ignition, a shorter one for locking doors and a trunk lid. Each key is...
Controls and instrumentation The location of the controls and instrumentation is shown in fig. 4. Pic. 4. Controls and instrumentation: 1 - switch lever for windshield wipers and washers of the windshield and...
Auxiliary equipment car sun visors designed to protect the driver and passenger from blinding sunlight. Depending on the direction of the sun's rays, the visors can be set to position I (pic. 5) or 11....
Interior ventilation and heating The interior ventilation and heating are controlled according to the outside temperature as shown below. Pic. 9. Controls for ventilation and interior heating: 1 - side nozzles; 2...
Opening doors Doors from the outside can be opened by pushing the handle up (pic. 10). When the doors are opened, the interior lighting turns on automatically. front doors lockable and lockable...
Front seats To adjust the front seats in the longitudinal direction, turn down the locking handle 1 (pic. 13). Release the handle after moving the seat. The seat back tilts slightly by...
Engine hood To open the engine hood, pull lever 7 towards you ( rice. 4 ) and lift the hood. In the open position, the hood is held by stop 1 (pic. 14). When the hood is opened, if the...
Fuel cap and trunk To access plug 1 (pic. 15) fuel tank, press on the front edge of cover 2, located on the rear right side of the body. The trunk lock is opened by turning the key counterclockwise....
Installing license plates To install the front license plate on the car, fix the sign 5 (pic. 16) on the bumper 1 with screws 2 with washers 3 and nuts 4. Pic. 16. Mounting license plates: 1 - front...
Engine start Starting a cold engine 1. Pump fuel into the carburetor float chamber by pressing lever 1 several times (pic. 17) manual pumping of fuel. This operation is recommended to be...
Car movement Before driving, check the position of the parking brake lever - start driving only with the lever fully lowered. At very low ambient temperatures and after a long period of...
Operation of a new car During the first 2000-3000 km of the car: 1. Before each ride, check and correct the air pressure in the tires. 2. In time, according to road conditions, shift to a lower gear,...
Use of seat belts Seat belts are an effective means of protecting the driver and passengers from the severe consequences of traffic accidents. Cars are equipped with two types of belts - with and...
Ignition advance correction When operating a car, sometimes, depending on the quality of the fuel being refueled, it becomes necessary to adjust the ignition timing. Carry out the adjustment on a warm...
Towing a car To tow the vehicle, attach the cable only to the front 1 (pic. 20) or back 2 eyes. Tow the car smoothly, without jerks and sharp turns. Pic. 20. Car towing eyelets: 1 - front...