Exterior elements of car body VAZ-21214

All articles about the device and repair of external elements (exterior) of the body and frame of VAZ-21214 Niva cars and their modifications.

Body elements and interior equipment
Removable body parts: 1 – radiator grille; 2 – car emblem; 3 – Front bumper trim; 4 – Front bumper trim holder; 5 – side trim of the front bumper; 6 – Front bumper bracket; 7 –...

Features of the car body design
The body is an all-metal, welded, load-bearing structure. Its elements are connected to each other by contact welding (in hard-to-reach places - by electric welding with a...

Removal the radiator grille
We remove the radiator grille to access the headlights. Using a Phillips screwdriver, unscrew the six screws securing the trim to the body. By pressing two pairs of plastic...

Removal the hood lock
Using pliers, bend the end of the rod. We move the retaining tube. We disconnect the rod from the lock. We straighten the rod and remove the retaining tube. Use a felt-tip pen to...

Removal the hood
Using pliers, remove the cotter pin from the hole in the hood retainer stop. We remove the metal and rubber washers. Using a 13 mm spanner, unscrew the bolt of the right hinge…...

Removal the oil pan protection plate and mudguards of the injection engine
Attention! We carry out the work on an inspection pit or lift. Using an 8 mm socket head, unscrew the screw connecting the oil pan protection plate and the left mudguard. Using a...

Removal the oil pan protection plate and splash guard of a carburetor engine
Using a 13 mm head, unscrew the two bolts securing the oil pan protection plate to the lower front cross member and one bolt to the front suspension cross member. Remove the oil...

Removal and disassembling the front and rear bumpers and towing eyes
To remove the front bumper, remove the crankcase bottom protection plate and mudguard. Using a 22 mm head, unscrew the bolt securing the towing eye and bumper connector to the...

Removal and installation the windshield
We remove the windshield to replace it or dismantle the roof trim. We remove the windshield wiper arms (see Removal the windshield wiper ). Remove the windshield heating duct (see...

Removal the outside rearview mirror
We remove the outside rearview mirror for replacement or when completely disassembling the door. Using a Phillips screwdriver, unscrew the two screws. We remove the mirror and the...

Car body wash
Regular car washing is an important part of car body care. Dirt, salt, bird droppings and other contaminants settle on the body, eventually forming a film that leads to dulling of...

Preservation and protection of paintwork
After the car body has been thoroughly washed and dried, we begin polishing and protecting the surface. If the paintwork shows signs of dullness, scratches, small marks, or traces...

Removal the spare wheel pipe and support
We remove the spare wheel support to access the fuel filter of the injection engine and the main brake cylinder. We remove the pipe to access the radiator and units located on the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Body: Exterior VAZ-21051 (1979-2010)
➠ Body: Exterior VAZ-2110 (1995-2007)
➠ Body: Exterior VAZ-2107 (1982-2012)
➠ Body: Exterior VAZ-2114 (2004-2013)
➠ Body: Exterior VAZ-21099 (1990-2004)

Share with friends: