All articles about the device and repair of internal elements (interior) of the body and interior trim of VAZ-2107 Zhiguli cars and their modifications.
Internal rear-view mirror — removal and installation Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Using a slotted screwdriver, pry off the mirror bracket cover and remove...
Front seat — removal and installation The operation is shown on the passenger seat as an example. The driver's seat is removed in the same way. Removing 1. We prepare the car for operations (see " Vehicle preparation...
Front seat adjustment mechanisms — disassembly Disassembly 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Remove the front seat (see above, "Front seat - removal and...
Rear seat — removal and installation The seat cushion is mounted on two latches welded to the body floor cross member. The upper part of the backrest is fixed with two metal plates in brackets on the body shelf, and...
Radio receiver panel — removal and installation Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Remove the top insert of the radio panel (see " Upper insert of the...
Instrument panel — removal and installation Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Disconnect the wire from the negative battery terminal (see " Battery -...
Heater tap — replacement Replacement of the heater tap is carried out in case of violation of its tightness. A sign of a leaky faucet is the formation of puddles of coolant on the carpet at the feet of...
Heater fan motor — replacement Removing 1. We prepare the car for operations (see " Vehicle preparation for maintenance and repair "). 2. Set the lower lever of the ventilation system control unit to the...
Heater Radiator — Replacement To perform the work, you will need two new rubber gaskets for the heater tap and radiator pipe, two worm clamps with a diameter of 16-23 mm and coolant. Removing 1. We prepare the...