All articles about the device and repair of internal elements (interior) of the body and trim of the VAZ-2115 (Lada Samara 115, sedan) and their modifications.
Removal and installation the front seat You will need: a screwdriver, an 8 mm socket head, and a ratchet. 1. Move the seat forward as far as it will go, use a screwdriver to remove the lower ends of the torsion bars...
Removal and installation the rear seat You will need: a 10 mm socket head and a ratchet. 1. Fold the rear seat cushion forward, unscrew the two hinge mounting bolts and remove the cushion. 2. Turn the lock handle and...
Replacing the front seat belt You will need: a screwdriver, a 17 mm wrench. 1. Remove the cover from the head of the belt buckle mounting bolt. 2. Unscrew the bolt… 3. …and remove the seat belt buckle assembly...
Rear Seat Belt Replacement (Hatchback) You will need: a screwdriver, a 17 mm socket head, and a ratchet. 1. Fold the rear seat cushion forward (see " Removal and installation the rear seat "). 2. Remove the belt buckle...
Rear Seat Belt Replacement (Sedan) You will need: a screwdriver, a 17 mm socket head, and a ratchet. 1. Fold the rear seat cushion forward, remove the cover from the head of the lap belt mounting bolt… 2. …and...
Removal and installation of interior trim 1. Remove the rear seat belt (see " Replacing the rear seat belt of hatchback cars "). 2. Turn the two clamps 90°… 3. …and remove the middle trim of the rear panel. 4. Remove the...
Replacing the interior rearview mirror The interior rearview mirror is mounted on a bracket glued to the inside of the windshield. You will need a screwdriver. 1. Loosen the bracket locking screw, slide the bracket up...
Replacing sun visors You will need a screwdriver. 1. Lower the visor and remove it from the holder. 2. Remove the bracket mounting screws… 3. …and remove the visor. 4. Remove the screw securing the...
Replacing handrails You will need a screwdriver. 1. Remove the side… 2. ...and the middle lining of the screws securing the rear and front handrails. Note: The center cover of the front and rear grab...
Removal and installation steering column trims You will need a screwdriver. 1. Disconnect the wire from the "–" terminal of the battery. 2. Remove the three screws securing the upper steering column trim to the lower trim. 3....
Removal and installation the floor tunnel lining You will need a screwdriver. 1. Disconnect the wire from the "–" terminal of the battery. 2. Move the parking brake lever to the uppermost position. 3. Move the front seats...
Removal and installation the instrument panel shield You will need a screwdriver. 1. Disconnect the wire from the "–" terminal of the battery. 2. Remove the five screws securing the right console panel to the instrument panel, to...
Removal and installation the instrument panel You will need: a screwdriver, 13 mm and 8 mm wrenches, and pliers. 1. Disconnect the wire from the "–" terminal of the battery. 2. Remove the instrument panel shield (see "...
Disassembly and assembly of the instrument panel You will need: a screwdriver, pliers. 1. Remove the instrument panel (see " Removal and installation the instrument panel "). 2. Remove the screws securing the upper right air...
Removal and installation the heater radiator If coolant is leaking from the heater, it means the radiator is leaking and needs to be replaced. You will need a screwdriver. 1. Disconnect the wire from the "–" terminal of the...
Removal and installation the heater You will need: a screwdriver, a 10 mm wrench. 1. Disconnect the wire from the "–" terminal of the battery. 2. Drain the coolant from the engine cooling system with the heater...