Removing
1. We prepare the car for operations (see "Vehicle preparation for maintenance and repair").
2. Remove the top insert of the radio panel (see "Upper insert of the radio receiver panel - replacement of lamps and dimmer").
3. Using a 10 mm socket or spanner wrench, unscrew the two nuts of the upper fastening of the radio receiver panel.
4. Prying with a slotted screwdriver, remove the overlay of the radio panel.
5. Alternately, we push the wire blocks out of the holes in the panel and remove the key switches from the blocks.
6. Using a Phillips screwdriver, unscrew the two self-tapping screws of the lower fastening of the radio receiver panel.
7. We shift the panel back and lift it, removing the wire blocks and the gear lever from the holes in the panel.
Installation
Installation of the removed parts is carried out in the reverse order.