Removing
1. We prepare the car for operations (see "Vehicle preparation for maintenance and repair").
2. Move the seat all the way forward and use an 8 mm socket wrench to unscrew the two bolts for the rear fastening of the guide slide.
3. We move the seat all the way back and with an 8 mm socket wrench we unscrew the bolt of the front fastening of the outer slide guide.
4. Using a 13 mm socket wrench, unscrew the nut of the bolt of the front fastening of the inner sled guide and remove the bolt.
5. Having raised the seat, we take it out of the passenger compartment through the front door.
Installation
1. Before installation, we clean and apply grease to the screw and the rubbing surfaces of the slide.
2. Installing the front seat is done in reverse order.