Tightening torques for threaded connections (VAZ-2107)

Detail	Number of attachment points	Thread	Tightening torque Nm (kgf·m)
Engine
Oil pan mounting bolt	18	M6	5,2-8,4 (0,52-0,84)
Breather cap fastening nut	1	M8	12-15 (1,2-1,5)
Intake manifold and exhaust manifold fastening nut	8	M8	21-26 (2,1-2,6)
Spark plug	4	M14x1.25	32-40 (3,2-4,0)
Coolant pump mounting bolt	3	M8	22-27 (2,2-2,7)
Generator Bracket Bolt	3	M10x1.25	45-56 (4,5-5,6)
Generator mounting plate fastening nut	1	M10x1.25	29-46 (2,9-4,6)
Nut of the generator mounting bolt to the bracket	1	M12x1.25	46-74 (4,6-7,4)
Rear engine mount crossmember mounting nut	2	M8	15-19 (1,5-1,9)
Rear support to gearbox mounting nut	2	M8	24-29 (2,4-2,9)
Nut of the bolt securing the rear support and crossmember	2	M8	16-26 (1,6-2,6)
Clutch
Clutch and brake pedal bolt nut	1	M12x1.25	13-21 (1,3-2,1)
Clutch and brake master cylinder mounting nut	4	M8	10-16 (1,0-1,6)
Transmission
Reverse light switch	1	M14x1.5	29-46 (2,9-4,6)
Clutch housing to engine mounting bolt	4	M12x1.25	55-89 (5,5-8,9)
Rod retainer cover mounting bolt	2	M8	16-26 (1,6-2,6)
Rear cover fastening nut	6	M8	16-26 (1,6-2,6)
Bottom cover fastening nut	10	M6	5,2-8,4 (0,52-0,84)
Cardan transmission
Elastic coupling mounting bolt nut	6	M12x1.25	59-73 (5,9-7,3)
Nut of the bolt securing the flange of the cardan shaft to the flange of the gearbox	4	M8	28-35 (2,8-3,5)
Steering
Steering gear housing mounting bolt nut	3	M10x1.25	34-42 (3,4-4,2)
Nut of the pendulum arm bracket mounting bolt	2	M10x1.25	34-42 (3,4-4,2)
Bolt for fastening the intermediate shaft to the upper steering shaft and to the worm shaft	2	M8	23-28 (2,3-2,8)
Bipod mounting nut	1	M20x1.5	204-252 (20,4-25,2)
Pendulum arm axle nut	1	M14x1.5	65-105 (6,5-10,5)
Front suspension
Bolt for fastening the cross member to the body side member	2	M12x1.25	81-100 (8,1-10,0)
Nut of the lower bolts of fastening of the cross member to the body side member	4	M12x1.25	68-84 (6,8-8,4)
Lower arm axle mounting bolt nut	4	M1 2x1.25	68-84 (6,8-8,4)
Lower arm axle nut	4	M14x1.5	65-105 (6,5-10,5)
Upper arm axle nut	2	M14x1.5	58-94 (5,8-9,4)
Shock absorber upper end mounting nut	2	M10x1.25	29-46 (2,9-4,6)
Lower end shock absorber mounting nut	2	M10x1.25	51-63 (5,1-6,3)
Anti-roll bar fastening nut	8	M8	15-19 (1,5-1,9)
Nut for fastening ball joints to steering knuckle	4	M14x1.5	85-105 (8,5-10,5)
Rear suspension
Shock absorber mounting nut	4	M12x1.25	39-63 (3,9-6,3)
Nut of the bolt for fastening the transverse and longitudinal rods	10	M12x1.25	68-84 (6,8-8,4)

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text was reviewed by the specialist: Grigory Vologodtsev

Share with friends:

VAZ-2107: Maintenance

Rolling bearings used in automobiles
Information on the content of precious materials
Fuels and lubricants, operating fluids and automotive preparations
Lamps used in the car
List of tools and accessories supplied with the vehicle

More articles from other manuals on VAZ cars:
➠ Tightening torques for threaded connections VAZ-1111 (1988-1996)
➠ Tightening torques for the most critical threaded connections VAZ-2101 (1970-1983)
➠ Tightening torques for threaded connections VAZ-2105 (1979-2010)
➠ Tightening torques for threaded connections VAZ-2106 (1976-2006)
➠ Tightening torques for threaded connections VAZ-2108 (1984-2003)

Link in different formats to this page

TextHTMLBB Code

Visitor comments

No comments yet