Contents: Engine ↓ Clutch ↓ Transmission ↓ Cardan transmission ↓ Rear axle ↓ Steering ↓ Front suspension ↓ Rear suspension ↓
Engine
| Detail | Thread | Tightening torque, kgf·m |
| Main bearing cap fastening bolt | M10x1.25 | 7,0—8,6 |
| Oil pan mounting bolt | M6 | 0,52—0,84 |
| Breather cap stud | M8 | 1,7—2,1 |
| Breather cap nut | M8 | 1,2—1,5 |
| Cylinder head bolt: pre-tightening | M 12x1.25 | 3,4—4,2 |
| final tightening | 9,8—12,1 | |
| Cylinder head mounting bolt | M8 | 3,2—4,0 |
| Nut for fastening the intake and exhaust pipes | M8 | 2,1—2,6 |
| Connecting rod cap bolt nut | M9x1 | 4,4—5,5 |
| Flywheel mounting bolt | M10x1.25 | 7,2—8,9 |
| Chain tensioner shoe mounting bolt | M10x1.25 | 3,8—4,7 |
| Tensioner roller bracket mounting bolt* | M8 | 2,5—3,5 |
| Camshaft Bearing Housing Nut | M8 | 1,9—2,3 |
| Bolts of camshaft sprockets and oil pump drive shaft | M10x1,25 | 4,2—5,1 |
| Camshaft and Oil Pump Drive Shaft Pulley Bolts* | M10x1.25 | 6,8—8,9 |
| Valve adjusting bolt nut | M12x1,25 | 4,8—5,6 |
| Valve adjusting bolt bushing | M18x1.5 | 8,5—10,5 |
| Spark plug | M14x1.25 | 3,2—4,0 |
| Coolant pump mounting bolt | M8 | 2,2—2,7 |
| Exhaust pipe mounting nut | M8 | 1,4—2,3 |
| cooling jackets | ||
| Crankshaft ratchet | M20x1.5 | 10,4—12,8 |
| Generator mounting bracket bolt | M10x1.25 | 4,5—5,6 |
| Generator mounting plate fastening nut | M10x1.25 | 2,9—4,6 |
| Nut of the generator mounting bolt to the bracket | M12x1.25 | 4,6—7,4 |
| Nut securing the mounting bar to the generator | M10x1.25 | 2,9—4,6 |
| Nut securing the powertrain support cushion to the engine bracket | M10x1.25 | 2,2—3,6 |
| Nut securing the powertrain support cushion to the front suspension crossmember | M10x1.25 | 2,8—3,5 |
| Nut securing plate to powertrain support cushion | M6 | 0,58—0,94 |
| Rear engine mount crossmember mounting nut | M8 | 1,5—1,9 |
| Nut securing the rear support of the power unit to the gearbox | M8 | 2,4—2,9 |
| Nut of the bolt securing the rear support of the power unit to the crossmember | M8 | 1,6—2,6 |
Clutch
| Detail | Thread | Tightening torque, kgf·m |
| Clutch mounting bolt | M8 | 2,0—3,2 |
| Clutch and brake pedal axle (bolt) nut | M12x1.25 | 1,3—2,1 |
| Clutch and brake master cylinder mounting nut | M8 | 1,0—1,6 |
Transmission
| Detail | Thread | Tightening torque, kgf·m |
| Reverse light switch | M14x1.5 | 2,9—4,6 |
| Clutch housing to engine mounting bolts | M12x1,25 | 5,5-8,9 |
| Nuts securing the clutch housing to the gearbox | M10x1.25 | 3,2—5,2 |
| M8 | 1,6—2,6 | |
| Rod retainer cover mounting bolt | M8 | 1,6—2,6 |
| Rear cover fastening nut | M8 | 1,6—2,6 |
| Driven shaft rear end nut | M20x1 | 6,8—8,4 |
| Intermediate shaft bearing clamp washer bolt | M12x1.25 | 8,1—10,0 |
| Bolt securing fork to gear shift rod | M6 | 1,2—1,9 |
Cardan transmission
| Detail | Thread | Tightening torque, kgf·m |
| Front propeller shaft yoke nut | M16x1.5 | 8,1—10,0 |
| Nuts for bolts for fastening the elastic coupling | M12x1.25 | 5,9—7,3 |
| Nut of the bolt securing the flange of the cardan shaft to the flange of the gearbox | M8 | 2,8—3,5 |
Rear axle
| Detail | Thread | Tightening torque, kgf·m |
| Gearbox mounting bolt | M8 | 3,6—4 4 |
| Differential bearing cap mounting bolt | M10x1.25 | 4,4—5,5 |
| Driven gear mounting bolt | M10x1.25 | 8,5—10,5 |
| Nut for fastening the flange to the drive gear | M16x1.5 | 12,0—26,0 |
| Axle shaft bearing and rear brake mounting plate nut | M 10x1.25 | 4,2—5,2 |
Steering
| Detail | Thread | Tightening torque, kgf·m |
| Steering gear housing mounting bolt nut | M10x1.25 | 3,4—4,2 |
| Nut of the pendulum arm bracket mounting bolt | M10x1.25 | 3,4—4,2 |
| Steering link ball joint nut** | M14x1.5 | 4,3—5,4 |
| Nut for fastening the upper and lower shafts to the pivot shaft | M8 | 2,3—2,8 |
| Steering wheel mounting nut | M16x1.5 | 3,2—5,2 |
| Steering shaft bracket and ignition switch mounting nut | M8 | 1,5—1,9 |
| Bipod mounting nut | M20x1.5 | 20,4—25,2 |
| Pendulum arm axle nut | M14x1.5 | 6,5—10,5 |
Front suspension
| Detail | Thread | Tightening torque, kgf·m |
| Bolt for fastening the cross member to the body side member | M12x1,25 | 8,0—10,0 |
| Nut of the lower bolts of fastening of the cross member to the body side member | M12x1.25 | 6,8—8,4 |
| Lower arm axle mounting bolt nut | M12x1.25 | 6,8—8,4 |
| Lower arm axle nut | M14x1.5 | 6,5—10,5 |
| Upper arm axle nut | M14x1.5 | 5,8—9,4 |
| Shock absorber upper end mounting nut | M10x1.25 | 2,8—3,5 |
| Lower end shock absorber mounting nut | M10x1.25 | 5,1—6,3 |
| Front wheel hub bearing nut | M18x1.5 | See the "Front Suspension" section |
| Bolt for mounting the caliper to the steering knuckle | M10x1.25 | 3,0—3,7 |
| Anti-roll bar mounting nut | M8 | 1,5—1,9 |
| Nuts for fastening ball joints to steering knuckle | M14x1.5 | 8,5—10,5 |
| Wheel mounting bolt | M12x1.25 | 5,9—7,3 |
| Steering knuckle bolt nut | M10x1.25 | 5,1—6,3 |
Rear suspension
| Detail | Thread | Tightening torque, kgf·m |
| Shock absorber mounting nuts | M12x1.25 | 3,9—6,3 |
| Nuts for bolts securing cross and longitudinal rods | M12x1.25 | 6,8—8,4 |
* For engine 2105.
** If the nut does not match the hole for the cotter pin, tighten it further (to an angle less than 60°) to ensure cotter pinning.