Repair of interior elements of the cabin VAZ-21061 «Zhiguli»
Replacement of an internal rear-view mirror Prying off with a screwdriver, remove the decorative lining of the mirror bracket. Using a Phillips screwdriver, unscrew the two self-tapping screws... ...and remove the mirror....
Sun visor replacement Pulling it towards you, we remove the axis of the sun visor from the holder. Using a Phillips screwdriver, unscrew the three screws... ...and remove the visor. Remove the second...
Ceiling lining replacement Removing the interior rear view mirror (see Replacement of an internal rear-view mirror ). Removing sun visors (see Sun visor replacement ). Unscrew the front screw of the right...
Ceiling rail replacement Using a screwdriver, pry off and remove the two handrail trims. Loosen the two screws with a Phillips screwdriver... ... and remove the mounting plates and the handrail itself....
Front seat replacement The front seat is fixed to the floor at four points: two in front and two in the back. Slide the seat all the way forward. socket wrench «for 8» unscrew both bolts of the rear...
Front seat skid replacement Pliers remove the spring retaining clip. Holding the rod with a spring from above, we unscrew the screw-knob for adjusting the inclination of the seatback. socket wrench «for 8»...
Rear seat replacement This work is more convenient to do together. We open both rear doors and pull the pillow off the two pin clips with a sharp upward movement. Push the seat cushion forward and...
Replacing the rear mat and soundproofing cover Using a Phillips screwdriver, unscrew three screws each and remove the front and rear door sill trims. Removing the bottom trim of the center console (see Replacing the front seat...
Replacing the lining of the rear pillar of the roof By hand, remove the rear door seal from the rear roof pillar. Using a screwdriver, pry off and remove the metal clips and peel off the fabric. Inserting a slotted screwdriver...
B-pillar upholstery replacement Removing the seat belt from the rack (see Replacing the front seat belt ). Using a Phillips screwdriver, unscrew the two screws securing the lower upholstery of the rack... ......
Replacing the front seat belt Prying off with a screwdriver, remove the decorative trims of the lower... ...and the upper seat belt anchorage to the B-pillar. Key or head «at 17» Loosen the top bolt. Using the...
Replacing the dashboard shelf Using a Phillips screwdriver, unscrew the two screws securing the shelf to the sidewall upholstery... ... and two self-tapping screws for attaching the shelf to the radio panel....
Side panel upholstery replacement Removing the dashboard shelf (see Replacing the dashboard shelf ). We pry with a screwdriver and take out the plastic buttons (caps) upholstery fixings. If it is not possible to...
Replacing the radio panel Removing the dashboard shelf (see Replacing the dashboard shelf ). Remove the gear lever handle (see Gearbox replacement ). Removing the radio panel insert (see Removing the radio...
Glove box body replacement Removing the dashboard shelf (see Replacing the dashboard shelf ). Open the glove box lid. In the left front corner of the glove box, use a Phillips screwdriver to unscrew the two...
Instrument panel replacement We are filming «negative» battery terminal. Removing the dashboard shelf (see Replacing the dashboard shelf ). Removing the radio panel (see Replacing the radio panel ). Removing...