Car steering VAZ-2106

All articles about the device and repair of components and elements of the steering of car VAZ-2106 Zhiguli and its modifications.

Description of the steering design
The vehicle is equipped with a worm-and-roller gear steering system. The upper part of the steering control, located in the car's interior, is covered with removable plastic...

Steering — checking the technical condition and adjusting the steering mechanism
We check the condition of the steering when signs of malfunction appear (knocking, increased play or tight steering wheel rotation) or during periodic inspections of the vehicle...

Steering Gearbox — Checking Oil Level
Sequence of execution 1. Before checking the oil level, wipe the plug and the steering gear housing cover with a rag. 2. With an open-end wrench by 8 mm unscrew the filler plug....

Steering gear engagement — adjustment
An assistant will be needed to complete the job. Sequence of execution 1. Place the car on a level, horizontal surface. The wheels should be aligned in the direction of...

Steering wheel — removal and installation
Removal 1. Prepare the car for work (see " Preparing a car for maintenance and repair "). 2. Set the steering wheel in the direction of straight-line movement of the car. 3....

Steering shaft covers — removal and installation
We remove the covers to replace the steering column switches, ignition switch and steering column. Removal 1. Prepare the car for work (see " Preparing a car for maintenance and...

Steering shaft — removal and installation
We remove the steering shaft for replacement. To complete the work you will need an assistant and a special key by 10 mm for brake pipes, a transparent vinyl pipe of suitable...

Steering rods — replacement
Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Clean the nuts and covers of the steering rod from dirt. 3....

Steering gear reducer — removal and installation
We remove the gearbox for replacement. An assistant will be needed to complete the job. Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for...

Pendulum arm — replacement
We remove the pendulum lever for replacement. Removal 1. Place the vehicle on an inspection pit or overpass (see " Preparing a car for maintenance and repair "). 2. Disconnect the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Steering VAZ-2110 (1995-2007)
➠ Chassis: Steering VAZ-2105 (1979-2010)
➠ Chassis: Steering VAZ-2115 (1997-2012)
➠ Chassis: Steering VAZ-21011 (1974-1983)
➠ Chassis: Steering VAZ-2107 (1982-2012)

Share with friends: