Description of the design of the driveline Elements of cardan transmission 1 - elastic coupling; 2 – a flange of a secondary shaft of a transmission; 3 - mud deflector; 4 – a secondary shaft of a transmission; 5 - nut; 6 –...
Drivetrain maintenance When using the vehicle, it must be (10 thousand kilometers) lubricate the spline joint of the cardan shaft near the flexible coupling. Instead of a plug on the flange of the...
Replacing the driveline We carry out work on a viewing ditch or a lift. Disconnect the rear parking brake cable release spring (see Removal of components and adjustment of the parking brake system ). We...
Dismantling the universal joint Attention! In order not to disturb the balance, before disassembling the driveline, we apply with a chisel or paint the marks of the relative position of its parts. The retaining...
Assembling the universal joint We put seals on the spikes of the cross and put plastic plugs. We put grease Fiol-2U or No. 158 in the hinge bearings. We insert the spikes of the cross into the holes of the...
Replacing the intermediate support bearing We press out the needle bearings and remove the rear driveshaft (see Dismantling the universal joint ). socket head «at 27» unscrew, but not completely, the nut of the front...
Replacing the flexible coupling Removing the driveline (see Replacing the driveline ). head «at 13» unscrew the two nuts securing the gearbox cross member to the body. In this case, the back of the box, together...