Contents: Removal ↓ Installation ↓
Removal
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
2. Using a rubber bulb, remove liquid from the tank.
3. Key by 10 mm we unscrew the nut of the clamp securing the tank to the bulkhead of the engine compartment.
4. Bend back the clamp and remove the tank.
5. Loosen the band clamp with pliers and remove the hose from the tank fitting.
Installation
1. The tank is installed in the reverse order.
2. Add fluid to the reservoir to the required level, and bleed the system if necessary (see above, "Clutch release hydraulic drive - fluid replacement and bleeding").
The original source is located on the website VAZBOOK