Removing
1. We prepare the car for work (see "Vehicle preparation for maintenance and repair").
2. We move the seat all the way forward and with a socket wrench by 8 mm unscrew the two bolts of the rear fastening of the guide rail.
3. We move the seat all the way back and with a socket wrench by 8 mm unscrew the bolt of the front fastening of the outer guide of the sled.
4. socket wrench by 13 mm unscrew the nut of the bolt of the front fastening of the inner slide rail and remove the bolt.
5. Having raised the seat, we take it out of the passenger compartment through the front door.
Installation
1. Before installation, we clean and apply grease to the screw threads and the rubbing surfaces of the sled.
2. Installing the front seat is done in reverse order.