1 – torsion bars; 2 – brackets; 3 – base stand
1. Move the seat forward as far as it will go, use a screwdriver to remove the lower ends of the torsion bars from the holes and remove the torsion bars.
2. Slide the seat back as far as it will go, unscrew the four mounting nuts and remove the two brackets.
3. Lift the front of the seat and remove the two nuts securing the front runners.
4. Move the seat forward as far as it will go and remove the two rear runner mounting nuts.
(The material is posted on the website: vazbook.ru)
5. Remove the seat from the passenger compartment.
6. Loosen the mounting bolt and remove the seat belt buckle from the runners.
7. Remove the retaining ring.
8. Remove the threaded sleeve.
9. Remove the retaining ring and take out the second slide mounting bushing.
10. Remove the skids from the seat. Install the seats in the reverse order of removal.