Vehicle movement (VAZ-2107)

Before starting to move, check the position of the parking brake lever - start moving only with the lever fully lowered.

At very low ambient temperatures and after a long period of parking, it is recommended to drive for some time in lower gears. As the oil in the gearbox and rear axle warms up, shift successively to higher gears.

To move in reverse, press the gearshift lever all the way down and move it to the position corresponding to the reverse gear engagement. Engage the reverse gear only when the vehicle is completely stopped.

After crossing fords, as well as after washing the car, or after driving for a long time on a wet road, when water gets into the brake mechanisms of the wheels, perform several smooth braking movements while driving to dry the discs, drums and brake linings.

If possible, drive at moderate speeds. Sharp acceleration and deceleration, driving at high speeds lead to increased tire wear and excessive fuel consumption. Excessive fuel consumption is also caused by insufficient tire pressure, improper adjustment of the carburetor idle system, worn or dirty spark plugs.

While driving, monitor the operation of various units using the corresponding instruments and control lamps. Under normal conditions, all red control lamps should not light. When they turn on, it signals the need to check the corresponding unit.

The brake design provides effective braking. However, try to brake smoothly and moderately in all cases, avoiding sudden braking.

The text is taken from the online resource vazbook.ru