Replacing the rear gearbox (VAZ-21061)

We hang up the rear axle, drain the oil from the crankcase, remove the wheels and brake drums, take out the axle shafts. We disconnect the cardan shaft from the flange of the drive gear and move it to the side (see Replacing the cardan transmission).



Using a 13 mm spanner, unscrew the eight bolts securing the gearbox housing to the rear axle beam.



We remove the gearbox assembly.

We install the new gearbox in the reverse order of removal. We apply sealant to the threaded part of the crankcase mounting bolts. After installation, do not forget to fill the rear axle crankcase with oil.