Removing
1. We prepare the car for operations (see "Vehicle preparation for maintenance and repair").
2. With a punch, we knock out the finger of the door opening limiter from the hinges of the body and remove the finger with pliers.
3. Using an impact screwdriver, loosen the five screws securing the door hinges.
4. Holding the door, finally unscrew the screws of its fastening and remove it.
Installation
1. We install the door in the reverse order, focusing on the unpainted areas of the A-pillar.
2. We adjust the position of the door in the opening of the body so that the gaps around the perimeter of the door are uniform.
3. If necessary, adjust the position of the door latch by loosening the three screws securing the latch with a Torx-30 key. By moving the latch, we achieve a tight closing of the door with uniform gaps around the perimeter. We turn the screws.