Caution: If the door has electrical equipment, disconnect the wires before removing.
Notes:
- We recommend that two people remove and install the front door.
- When replacing a door, you need to remove all the fittings from the old door and move them to the new door.
1. Open the door and remove the two bolts securing the limiter bracket to the front pillar.
The original can be viewed on the portal (VAZBOOK)
2. Loosen the bolts securing the upper and lower door hinges to the front body pillar and remove the door.
3. The door is installed in the reverse order of removal. Before finally tightening the bolts securing the hinges to the front body pillar, close the door and adjust its position so that the gaps in the openings along the entire perimeter are the same. Then carefully open the door and finally tighten the bolts securing the hinges.