Oil pump — replacement (VAZ-2107)

We replace the oil pump if the oil pressure in the engine is insufficient or excessive when idling.

Removal

1. Place the vehicle on an inspection pit or overpass (see "Preparing a car for maintenance and repair").

2. Remove the engine oil pan (see "Engine oil pan - removal and installation").

3. Using a 13 mm socket wrench, unscrew the two oil pump mounting bolts. The pump mounting bolts are of different lengths.

3. Using a 13 mm socket wrench, unscrew the two oil pump mounting bolts. The pump mounting bolts…

4. Remove the oil pump and sealing gasket.

Installation

1. Before installing a new pump, replace the sealing gasket.

2. Installation of all removed parts is performed in reverse order.

3. Fill the engine with oil (see "Engine Oil - Checking Level and Replacement").

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text was reviewed by the specialist: Grigory Vologodtsev

Share with friends:

VAZ-2107: Engine repair

Intake manifold and exhaust manifold gasket for injection engine — replacement
Receiver — removal and installation
Cylinder head gasket for injection engine — replacement
Carburetor Engine Cylinder Head Gasket — Replacement
Carburetor Engine Intake Manifold and Exhaust Manifold Gaskets — Replacement

Crankcase ventilation oil separator — removal and installation
Powertrain Mounts — Replacement
Engine — removal and installation
Flywheel — removal and installation
Rear Crankshaft Oil Seal — Replacement