Contents: Removal ↓ Installation ↓
Removal
1. Prepare the vehicle for operations (see "Preparing a car for maintenance and repair").
2. Disconnect the mass air flow sensor from the air filter housing (see "Mass Air Flow Sensor - Checking and Replacing").
3. Using a slotted screwdriver, pry up the three rubber supports of the filter housing and remove them from the holes in the bracket.
4. Disconnect the air intake from the holder.
5. Remove the air filter housing with the air intake. If necessary, disconnect the air intake from the air filter housing pipe.
Installation
1. Using a screwdriver, remove the rubber supports from the holes in the housing.
2. To facilitate installation of the supports, lubricate them with a soap solution and install them in the bracket holes.
3. Install the air filter housing on the supports. Pressing on it, use pliers to pull out the supports one by one until the housing is fixed in their annular grooves.
4. Further installation of the removed parts is carried out in the reverse order.