Removing
1. We prepare the car for work (see "Vehicle preparation for maintenance and repair").
2. Using a Phillips screwdriver, unscrew the two screws securing the storage shelf to the radio panel.
3. Using the same tool, unscrew the two self-tapping screws securing the shelf to the sidewall upholstery.
4. Remove the storage shelf.
5. Prying with a slotted screwdriver, remove the radio panel insert (see "Inserting the radio receiver panel - removal and installation").
6. Using a Phillips screwdriver, unscrew the two self-tapping screws of the upper fastening of the radio receiver panel, located behind the insert.
7. With the same tool, unscrew the two screws of the lower fastening of the radio receiver panel on the right side.
Similarly, we turn off the self-cut fastening of the panel on the left side.
8. Raising the insert, remove the radio panel.
Installation
Installation of the removed parts is carried out in the reverse order.