Adjustment
1. To adjust, remove the signal from the bracket without disconnecting the wires (see "Removal" below).
2. The assistant presses the sound signal switch and holds it down. Using a slotted screwdriver, smoothly turning the screw clockwise or counterclockwise, adjust the sound signal, achieving the clearest, loudest sound.
Removal
1. Prepare the car for work (see "Preparing a car for maintenance and repair").
2. Disconnect the wire from the negative terminal of the battery (see "Battery - Removal and Installation").
3. Remove the radiator grille (see "Radiator grille and trim - removal and installation").
4. Disconnect the wires from the signal terminals.
5. Key by 13 mm we unscrew the nut that secures the signal to the bracket.
6. Remove the sound signal (the arrow shows the location of the horn bracket attachment to the body).
(The original is available on the online resource: vazbook.ru)
Installation
Installation of all removed parts is carried out in reverse order.