Note: There is an adjusting screw on the body of the horn, by turning which you can adjust the sound of the horn. Adjustment is more convenient to carry out with the assistant.
Adjustment and removal
1. Remove the inner lining of the radiator (see "Facing of a radiator - removal and installation").
2. socket wrench by 13 mm unscrew the nut securing the sound signal plate.
3. We fix the signal on the front bumper with a self-tapping screw.
4. Using a slotted screwdriver, turn the adjusting screw a small angle and check the operation of the sound signal. If necessary, continue the adjustment.
Recommendation: If the sound is hoarse and weak, and it is not possible to achieve an acceptable sound by turning the adjusting screw, then the sound signal must be replaced.
5. Disconnect the wiring harness block from the sound signal and replace the signal.
Installation
Install the sound signal in reverse order.