Removing the fuel tank cover (see Trunk upholstery replacement).
We disconnect the tips of the three wires and the fuel hose from the fuel level sensor (see Replacing the fuel gauge sensor).
To prevent fuel residues from flowing out, insert an M8 bolt into the hose and tighten the clamp.
key «on 10» unscrew the bolt and put the outer clamp of the tank on the trunk floor.
We remove the cover of the neck of the filler pipe from the flanging along the perimeter of the opening.
We take out the fuel tank from the luggage compartment.
Attention! Before any repair, the fuel tank must be thoroughly washed from the inside with hot water and detergent.
Install a new or repaired fuel tank in the reverse order of removal.
To remove the hatch cover..
... use a Phillips screwdriver to unscrew the two screws...
...and remove the hatch cover.