2. Disconnect the wire from the negative battery terminal (see "Battery - removal and installation").
3. Turning the headlamp cover counterclockwise, remove it.
Replacing the Low/High Beam Bulb
The car uses halogen lamps of low / high beam type AKG 12-60 + 55 (H4).
1. Disconnect the wire block from the lamp.
2. We release the spring clip from the grooves of the lamp socket.
Attention! When performing the following operation, during installation, do not touch the glass bulb of the lamp with your hands to prevent it from being oiled. Fat on the surface of the bulb leads to overheating of the lamp and premature failure.
3. We take out the lamp.
4. Install a new lamp in reverse order.
Replacing the parking light bulb
The car is equipped with side light lamps type A12-4-1 (T4W1).
1. We take out the cartridge with the lamp from the hole in the reflector.
2. Having drowned and turned counterclockwise, we take out the lamp from the cartridge.
3. We install a new lamp in the reverse order.
Replacing the turn signal lamp
A12-21-3 direction indicator lamps are installed in the headlight of the car (P21W).
1. Turn the lamp socket counterclockwise and remove it together with the lamp.
2. Having drowned and turned counterclockwise, we take out the lamp from the cartridge.
3. We install a new lamp in the reverse order.