2. Disconnect the wire from the negative battery terminal (see "Battery - removal and installation").
3. Turning the headlamp cover counterclockwise, remove it.
Replacing the Low/High Beam Bulb
On the car, halogen lamps of the dipped / main beam type AKG 12-60 + 55 are used (H4).
1. Disconnect the wire block from the lamp.
2. We release the spring clip from the grooves of the lamp socket.
Attention! When performing the following operation, during installation, do not take the glass bulb of the lamp with your hands to prevent it from being oiled. Fat on the surface of the bulb leads to overheating of the lamp and premature failure.
3. We take out the lamp.
4. Install a new lamp in reverse order.
Replacing the parking light bulb
The vehicle is equipped with A12-4-l side light bulbs (T4W1).
1. We take out the cartridge with the lamp from the hole in the reflector.
2. Having drowned and turned counterclockwise, we take out the lamp from the cartridge.
3. We install a new lamp in the reverse order.
Replacing the turn signal lamp
In the block headlight of the car, turn signal lamps of type A12-21-3 are installed (P21W).
1. Turn the lamp socket counterclockwise and remove it together with the lamp.
2. Having drowned and turned counterclockwise, we take out the lamp from the cartridge.
3. We install a new lamp in the reverse order.