Car rear suspension VAZ-2114

All articles about the device and repair of the rear suspension of cars VAZ-2114 (Lada Samara 114, hatchback) and their modifications.

Tightening torques for threaded connections
Table 10.3.1. Tightening torques for threaded connections Name of units and parts Thread Tightening torque, Nm (kgf·m) Wheel mounting bolts M12x1.25 65,2-92,6 (6,7-9,5) Rear wheel...

Description of the rear suspension design
The rear suspension of the car is semi-independent, made on an "elastic" beam with longitudinal levers, cylindrical springs and double-acting telescopic shock absorbers. The rear...

Rear suspension — technical condition check
The technical condition must be checked in accordance with the periodic maintenance regulations (see " Periodic maintenance "). The technical condition of the suspension can be...

Shock absorber and spring rear suspension — removal and installation
Note: It is convenient to perform the work in an inspection pit. But if necessary, you can remove and install the spring and shock absorber of the rear suspension by placing the...

Rear suspension beam — silent block replacement
To replace the silent block, it is not necessary to remove the beam from the car. We replace the silent blocks one by one, first at one, then at the other beam arm. To complete...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Rear suspension VAZ-2108 (1984-2003)
➠ Chassis: Rear suspension VAZ-2104 (1984-2012)
➠ Chassis: Rear suspension VAZ-2101 (1970-1983)
➠ Chassis: Rear suspension VAZ-2107 (1982-2012)
➠ Chassis: Rear suspension VAZ-1111 (1988-1996)

Share with friends: