All articles about the installation and repair of headlights and systems of external and internal lighting of VAZ-2114 cars (Lada Samara 114, hatchback) and their modifications.
Lighting and light signaling The car has two headlamps. Two-filament halogen lamps are used for high and low beams. To adjust the direction of the dipped beam beam, there are two screws with plastic handles...
Block headlight — light adjustment You will need an assistant to complete the work, as well as: flat horizontal platform (preferably near the wall of the house, fence or gate); tape measure 5 m long; cardboard...
High and low beam lamp 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Unscrew the two screws securing the protective cover and remove the cover. 3. Remove the...
Side light lamp 1. Remove the protective cover of the headlight (see above, "Replacing the low and high beam lamp"). 2. Without disconnecting the wires, remove the side light bulb holder from the...
Turn signal lamp 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Turning the direction indicator bulb holder counterclockwise, remove the cartridge...
Front turn signal — removal and installation Note: Operation is shown on the left turn signal. Removal of the right direction indicator is carried out similarly. For the convenience of working with the left turn signal, you...
Block headlight — removal and installation Note: Operation is shown on the left headlight. Removal of the right block headlight is carried out similarly. For the convenience of working with the spruce headlight, you can...
Fog lamp — adjustment You will need an assistant to complete the work, as well as: flat horizontal platform (preferably near the wall of the house, fence or gate); tape measure 5 m long; cardboard...
Fog lamp — lamp replacement Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Turn off outdoor lighting. 3. On the inside of the bumper, remove the protective...
Fog lamp — removal and installation Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Disconnect the fog lamp wiring harness. Note: The connector for the left fog...
Rear Light — Bulb Replacement Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair ") . 2. Turn off outdoor lighting. 3. In the luggage compartment, open the valve in the...
Rear light — removal and installation Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Turn off outdoor lighting. 3. Disconnect the wiring harness block from the rear...
Additional brake light — removal and installation Removing 1. We prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Using a Phillips screwdriver, unscrew the three screws securing the additional...