Vehicle heating and ventilation VAZ-2114

All articles about the installation and repair of the heating and ventilation system of VAZ-2114 cars (Lada Samara 114, hatchback) and their modifications.

Reference data on the heating and ventilation system
Table 15.1.1. Basic data for monitoring, adjustment and maintenance Resistance of the coils of the additional resistor, Ohm: with fewer turns 0,23 with a large number of turns...

Description of the ventilation and heating design
The ventilation and heating system of the car interior is a supply and exhaust system, and the interior is heated using the temperature of the liquid from the engine cooling...

Heating and ventilation system — technical condition check
1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Start the engine. 3. Move the lower lever of the heater control unit to the extreme left...

Heating and ventilation system filter — replacement
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Open the car hood and place it on the support. 3. Under the windshield frame, remove...

Heater tap — removal and installation
To carry out the work you will need an inspection pit or overpass. Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Drain the coolant...

Additional resistor — removal, testing and installation
To complete the work you will need a multimeter. Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the left instrument panel...

Electric heater fan — removal and installation
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the left instrument panel console trim (see " Instrument panel - removal and...

Heater radiator — removal and installation
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Drain the coolant (see " Coolant - replacement "). 3. Remove the instrument panel...

Heater — removal and installation
Removal 1. Prepare the vehicle for work (see " Preparing the car for maintenance and repair "). 2. Drain the coolant (see " Coolant - replacement "). 3. Remove the instrument...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Body: Heating and ventilation VAZ-21061 (1976-2006)
➠ Body: Ventilation and heating VAZ-2104 (1984-2012)
➠ Body: Ventilation and heating VAZ-2112 (1999-2007)
➠ Body: Ventilation and heating VAZ-21214 (1994-2006)

Share with friends: