Clutch and its drive repair VAZ-2114

All articles on the device, principle of operation and repair of clutch units and its drive of VAZ-2114 cars (Lada Samara 114, hatchback) and their modifications.

Clutch specifications
Table 9.1.1. Basic data for monitoring, adjustment and maintenance Working stroke of the clutch pedal, when adjusted, mm 125-135 Permissible increase in the working stroke of the...

Description of the clutch design
The vehicle is equipped with a single-disk dry clutch with a central pressure spring. The clutch release drive is cable-type, gap-free, with a release spring. The clutch consists...

Clutch — checking technical condition
Clutch in engaged position (with the pedal released) should not "slip" and transmit torque from the engine to the transmission without loss, and when the clutch pedal is pressed,...

Clutch release drive — adjustment
If the working stroke of the clutch pedal differs from that shown in the figure (see Fig. " Clutch "), it is necessary to adjust the length of the cable. To complete the work you...

Clutch cable — replacement
We replace the cable if it breaks, gets stuck in the sheath or is stretched excessively. Removal 1. For ease of work, remove the air filter (see " Air filter - removal and...

Clutch — replacement
Recommendation: When replacing the driven clutch disc, it is advisable to replace the pressure plate (basket) as well, even if there are no noticeable signs of wear on its working...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Clutch and drive shafts VAZ-11113 (1996-2003)
➠ Transmission: Clutch VAZ-2106 (1976-2006)
➠ Transmission: Clutch VAZ-2107 (1982-2012)
➠ Transmission: Clutch VAZ-21214 (1994-2006)
➠ Transmission: Clutch VAZ-2101 (1970-1983)

Share with friends: