Device and repair front rear VAZ-2101 Zhiguli
The structure and operation of the rear suspension
The rear wheel suspension is dependent. The rear axle beam is connected to the body by four longitudinal and one transverse rod. Both longitudinal rods 3 and 17 (Fig. 120) and...
The rear wheel suspension is dependent. The rear axle beam is connected to the body by four longitudinal and one transverse rod. Both longitudinal rods 3 and 17 (Fig. 120) and...
Removal and installation the rear suspension
To remove the suspension, lift the rear of the car and place it on stands. Then: remove the rear wheels and disconnect the propeller shaft from the main gear pinion flange;...
To remove the suspension, lift the rear of the car and place it on stands. Then: remove the rear wheels and disconnect the propeller shaft from the main gear pinion flange;...
Checking the technical condition of the rear suspension
The elastic characteristics of the springs are checked using the data below, after having first compressed them three times until the coils touch: Length of free spring, mm — 434...
The elastic characteristics of the springs are checked using the data below, after having first compressed them three times until the coils touch: Length of free spring, mm — 434...
Possible malfunctions of wheel suspensions
Possible wheel suspension faults, their causes and methods of elimination are given in Table 16.
Possible wheel suspension faults, their causes and methods of elimination are given in Table 16.
The structure and operation of shock absorbers
The shock absorbers of the front II (Fig. 122) and rear I suspensions differ in design only in size, the method of fastening the upper part and the presence of a rebound buffer 37...
The shock absorbers of the front II (Fig. 122) and rear I suspensions differ in design only in size, the method of fastening the upper part and the presence of a rebound buffer 37...
Checking the shock absorber on the stand
To check the performance of the shock absorber, its operating diagram is taken on a dynamometer stand. The operating diagrams should be taken according to the instructions after...
To check the performance of the shock absorber, its operating diagram is taken on a dynamometer stand. The operating diagrams should be taken according to the instructions after...
Disassembly and assembly of the shock absorber
After external washing, the shock absorber is secured in a vice. For this, special jaws 67.7824.9513.001 with semi-cylindrical sockets are used, which grip the shock absorber....
After external washing, the shock absorber is secured in a vice. For this, special jaws 67.7824.9513.001 with semi-cylindrical sockets are used, which grip the shock absorber....
Checking the technical condition of shock absorber parts
After disassembling the shock absorber, it is recommended to wash all its parts with gasoline or kerosene and dry them. When checking, the shock absorber parts must meet the...
After disassembling the shock absorber, it is recommended to wash all its parts with gasoline or kerosene and dry them. When checking, the shock absorber parts must meet the...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More articles from other manuals on VAZ cars:
➠ Chassis: Rear suspension VAZ-2108 (1984-2003)
➠ Chassis: Rear suspension VAZ-21061 (1976-2006)
➠ Chassis: Rear suspension VAZ-2104 (1984-2012)
➠ Chassis: Rear suspension VAZ-2115 (1997-2012)
➠ Chassis: Rear suspension VAZ-2107 (1982-2012)
➠ Chassis: Rear suspension VAZ-2108 (1984-2003)
➠ Chassis: Rear suspension VAZ-21061 (1976-2006)
➠ Chassis: Rear suspension VAZ-2104 (1984-2012)
➠ Chassis: Rear suspension VAZ-2115 (1997-2012)
➠ Chassis: Rear suspension VAZ-2107 (1982-2012)
Share with friends:
- General information
- Vehicle description
- Vehicle device
- Vehicle operation
- Maintenance
- Main malfunctions
- Applications
- Power unit
- Engine repair
- Cooling and lubrication system
- Supply system
- Transmission
- Clutch
- Transmission
- Cardan gear
- Rear axle
- Chassis
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Electrical equipment
- Engine electrics
- Equipment and devices
- General information
- Specifications
- Operation and maintenance
- Power unit
- Engine repair
- Cooling system
- Lubrication system
- Power and exhaust system
- Ignition system
- Engine electrics
- Transmission
- Clutch
- Car gearbox
- Cardan gear
- Rear axle
- Chassis
- Car suspension
- Steering
- Brake system
- Body
- Exterior
- Interior
- Doors and locks
- Electrical equipment
- Equipment and devices
- Lighting and signaling