Car rear suspension VAZ-2115

All articles about the device and repair of the rear suspension of VAZ-2115 cars (Lada Samara 115, sedan) and their modifications.

Features of the rear suspension design
6.5. Rear suspension parts: 1 – rubber-metal hinge; 2 – suspension arm mounting bracket; 3 – shock absorber casing; 4 – compression stroke buffer; 5 – casing cover; 6 – support...

Possible faults of the rear suspension
Possible rear suspension faults, their causes and solutions: Cause of malfunction Method of elimination Noise and knocking in the suspension when the car is moving The shock...

Replacing the shock absorber and rear suspension spring
Warning! Before raising the rear of the vehicle, engage first gear and place chocks under the front wheels. After raising the rear, place reliable supports next to the jack. Do...

Replacing the rear hub bearing
The hub is equipped with a double-row ball bearing, which does not require adjustment or lubrication during operation. If you experience play or noise while driving while rocking...

Replacing the rear suspension beam
It is more convenient to remove the rear axle on a lift. If it is not possible to install the car on a lift, carefully lift the rear of the car by installing a jack under the...

Checking and adjusting the front wheel alignment angles
Checking and adjusting wheel alignment angles is performed on special stands in accordance with the stand operating instructions. Warning! Replacing or repairing suspension parts...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Rear suspension VAZ-2108 (1984-2003)
➠ Chassis: Rear suspension VAZ-2104 (1984-2012)
➠ Chassis: Rear suspension VAZ-2101 (1970-1983)
➠ Chassis: Rear suspension VAZ-2107 (1982-2012)
➠ Chassis: Rear suspension VAZ-1111 (1988-1996)

Share with friends: