You will need: screwdriver, wrench «at 17».
1. Remove the trim from the head of the belt buckle bolt.
2. Turn out a bolt..
3.... and remove the seat belt buckle assembly with bushing and bolt.
4. Remove a decorative overlay of a bolt of the top fastening of a belt.
5. While holding the belt, remove the bolt..
6.... and remove the upper belt bracket with the bolt and bushing.
7. Turn out four screws of fastening of facing of an average rack and remove it.
8. Turn out a bolt of fastening of an inertial coil of a belt …
9.... and remove the coil from the middle rack box.
10. Install the seat belt in the reverse order of removal.