1. Remove rear panel trim.
2. Disconnect the connector with wires from the light. Do this carefully, as the connector sits tightly and the bus is quite thin.
3. Unscrew the four mounting nuts…
4. …and remove the rear light.
Notes: This is how the rear light components are arranged: 1 – housing; 2 – lamp holder; 3 – latch; 4 – diffuser. The latter is glued to the body of the flashlight, so if necessary, it must be replaced together with the body.
5. Press the latch…
6. …and remove the lamp holder from the flashlight housing.
7. Remove the seal from the flashlight housing.
8. Install the taillight in the reverse order of removal.