1 – body; 2 – lamp holder; 3 – latch; 4 – diffuser
The diffuser is glued to the body of the flashlight, so it must be replaced together with the body.
1 – Reverse light lamp; 2 – fog light lamp; 3 – direction indicator lamp; 4 – side light lamp; 5 – brake light
1. Turn the lid holder...
2....and remove the tail light cover.
3. Disconnect the connector with wires from the lamp. Do this carefully, as the connector sits tightly and the bus is quite thin.
4. Unscrew the four mounting nuts...
5....and remove the tail light.
6. Press the latch...
7....and remove the lamp holder from the flashlight housing.
8. Remove the seal from the light housing.
9. Install the tail light in reverse order.