Timing Chain Tensioner — Replacement (VAZ-2106)

The damper is installed on the left in the front part of the cylinder head.

Removal

1. Prepare the car for work (see "Preparing a car for maintenance and repair").

2. Remove the cylinder head cover (see "Cylinder Head Cover Gasket - Replacement").

3. Hold the chain guide with a socket wrench by 10 mm we unscrew the two bolts securing the damper to the cylinder head.

3. Hold the chain guide with a socket wrench by 10 mm we unscrew the two bolts securing the damper…

4. Remove the damper.

Installation

Installation of all removed parts is carried out in reverse order.

When installing the chain guide, pay attention to the fact that the bolt for its upper mounting is longer than the bolt for its lower mounting.

The original is available on the online resource VazBook.ru

This article is available at russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

The text was reviewed by the specialist: Grigory Vologodtsev

Share with friends:

VAZ-2106: Engine repair

Timing Chain Tensioner — Replacement
Gas distribution mechanism drive chain-replacement
Gas distribution mechanism drive chain-tension adjustment
Cylinder Head Cover Gasket — Replacement
Compression in engine cylinders — check

Camshaft and valve levers — replacement
Clearance between valve levers and camshaft cams — adjustment
Valve timing oil seals — replacement
Oil Pressure Sensors — Replacement
Engine oil pan — removal and installation