Contents: Removal the low oil pressure sensor ↓ Installation ↓ Removal the oil pressure indicator…↓ Installation ↓
The sensors are installed in the cylinder block adapter on the left side.
Removal the low oil pressure sensor
1. Prepare the car for work (see "Preparing a car for maintenance and repair").
2. Disconnect the wire from the negative terminal of the battery (see "Battery - Removal and Installation").
3. Remove the protective rubber cap from the sensor and disconnect the wire tip from the sensor output.
4. With a socket wrench by 21 mm or use a spark plug wrench of the same size to unscrew the sensor.
A sealing washer is installed between the adapter and the sensor.
Installation
The sensor is installed in the reverse order.
Removal the oil pressure indicator sensor
1. Prepare the car for work (see "Preparing a car for maintenance and repair").
2. Disconnect the wire from the negative terminal of the battery (see "Battery - Removal and Installation").
3. Remove the protective rubber cap from the sensor and disconnect the wire tip from the sensor output.
(Information taken from the website VAZbook)
4. Key by 19 mm unscrew the sensor.
A sealing washer is installed between the adapter and the sensor.
Installation
The sensor is installed in the reverse order.