All articles describing everyday functions for the daily operation of VAZ-2110, VAZ-2111 and VAZ-2112 cars.
About the vehicle owner's manual Please read this manual carefully before operating your vehicle! In it you will get acquainted with the features of its design, controls, equipment, as well as safety requirements...
Car keys Each car comes with two sets of keys. In each set (pic. 1) two keys each: longer - to turn on the ignition, shorter - for door locks and trunk lid. The number of the ignition key...
Remote control system for locking and unlocking The system is installed on parts of LADA family cars and is designed to lock and unlock the locks of all car doors remotely or by turning the key in the driver's door lock, as...
Door control To open the doors from the outside, pull handle 1 towards you (pic. 2). When the doors are opened, the interior lighting turns on automatically. Front doors The front doors have a...
Power window control Power windows are controlled by switches located on the floor tunnel lining ( see fig. 32 ). The power windows work when the ignition key is in position I («ignition»). By...
Seat adjustment To adjust the front seats in the longitudinal direction, pull up the locking lever 2 (pic. 5), located on the side of the cushion 3. After installing the seat, release the lever...
Belts and airbag Seat belts are an effective means of protecting the driver and passengers from the severe consequences of a traffic accident. To fasten the seat belt, pull it out of the spool and...
Installing a child restraint Under child restraint (restraint system) means a collection of items that may include a set of straps or flexible elements with buckles, adjustment and attachment devices and, in...
Salon equipment Outside mirror 5 ( rice. 3 ) adjust with knob 6 after adjusting the position of the driver's seat. In the variant version, the cars are equipped with an electric drive for...
Hood opening To open the hood, pull handle 1 towards you (pic. 14), then lift the hood 1 (pic. 15), put your hand between the hood and the front panel, lift up the safety hook tab 2 and lift...
Trunk lid (tailgate) trunk lid 3 (pic. 16) cars with a body «sedan» opens by turning key 1 clockwise or from inside by pressing button 22 ( rice. 26 ) and button 33 ( rice. 27 ) on the dashboard (in a...
Fuel tank plug To access plug 1 (pic. 18) fuel tank, open the cap 2. The plug is opened by turning counterclockwise. The plug should be screwed in clockwise until characteristic clicks appear....
Design features of the car LADA 1103-03 The car LADA 1103-03 is a version of the «deluxe suite». It uses the original front fenders, hood, front and rear bumpers, windscreen frame lining. Also installed moldings on the...
Design features of the car LADA PREMIER LADA PREMIER is a five-seater passenger car with a high level of comfort. An extended wheel base and large rear doors distinguish this model from LADA 1103-03. This provides rear...
Dashboard The instrument panel is shown in fig. 26. 1 - front door glass blowing nozzle. 2 - side nozzles of the ventilation and interior heating system. 3 - glove box cover ( see fig. 12...
Dashboard in variant version In a variant version, the instrument panel shown in fig. 27. 1 - instrument cluster ( see fig. 29 ). 2 - sound signal switch. 3 - ignition switch ( see fig. 31 ). 4 - alarm...
Instrument cluster The instrument cluster shown in Figure 28 is installed on the car. 1 - coolant temperature gauge. The transition of the arrow to the red zone of the scale indicates overheating of...
Variant instrument cluster In a variant version, the cars are equipped with a combination of instruments with a single-line liquid-crystal mileage indicator. It uses a self-test mode, which consists in a...
Liquid crystal indicator The top line displays total or daily mileage counters (optionally). To switch between display modes («around the ring») button 8 in the instrument cluster is used. If the daily...
Ignition switch The position of the key in the ignition switch is shown in Figure 31. 0 - «turned off». Everything is off, the key is removed. When the key is removed, the mechanical anti-theft...
Electronic anti-theft system In a variant version, the cars are equipped with an electronic anti-theft system, which makes it possible to start the engine only after reading the code from the working code...
Paddle switches 1 (pic. 33) - switch lever for direction indicators and headlights. If, with the ignition on, the lever is in position: I - direction indicators off; the dipped headlights are on...
Control units Control units for exterior mirrors, power windows and heated front seats (see fig. 34) provided for variants of the vehicle. 1 - lever position indicators. The signaling device...
On-board monitoring system display unit 1 (pic. 36) - an indicator of insufficient oil level in the engine crankcase. Lights up in orange if the oil level in the crankcase has dropped to the mark «MIN» by pointer....
Trip computer Trip computer (MK), shown in fig. 37 is installed in the variant instead of the clock. MK has 15 functions divided into 3 groups (see table. 2). Group selection is carried out by...
Computer function adjustment Clock correction Press button 4 in mode «current time». On the sixth signal of the exact time, press button 1, this resets the seconds and rounds the clock. Setting the current...
Heating and ventilation ATTENTION! In a variant version, the car can be equipped with either a heating and ventilation or air conditioning system. The heating and ventilation unit of the car is designed...
Installing license plates The vehicle comes with a license plate mounting kit. Front license plate 4 (pic. 39) mounted on the front bumper 1 with screws 2 with washers 3. Rear license plate 8 is mounted on...
Control of the technical condition of the car Your safety and protection of the environment largely depend on the technical serviceability of your vehicle and compliance with the rules for its operation. ATTENTION! Regularly...
Precautions during operation of the vehicle Do not exceed the vehicle load specified in the manual. Overloading causes damage to suspension components, premature tire wear and loss of vehicle stability. The weight of cargo...
Operation of a new car During the first 2000-5000 km run: 1. Before each ride, check and correct the air pressure in the tires. 2. When the car is moving, do not exceed the speeds indicated in Table. 3....
Engine start 1. Depress the clutch pedal and place the shift lever in neutral. 2. Insert the key into the ignition switch and turn on the starter. If the engine does not start on the first...
Car movement The movement of the car is recommended to start with a warm engine. If you do not have such an opportunity and you warm up the engine while driving, then at low ambient...
Power steering In a variant version, the cars are equipped with a power steering booster, which significantly reduces the effort on the steering wheel. If the power steering does not work (e.g....
Braking and parking The design of the brakes provides effective braking. However, try to brake smoothly and moderately at all times, avoiding hard braking. Warning! Do not turn off the ignition or...
Anti-Lock Braking System In the variant version, the cars are equipped with an anti-lock brake system (ABS), which prevents the wheels from blocking during braking, thereby ensuring the preservation of a...
Towing a car To tow the vehicle, attach the cable only to the front 1 (pic. 40) or rear 2 eyelets. On the towed vehicle, turn the key in the ignition switch to position I and turn on the...
Features of operating a car with a fuel injection system Lighting up the lamp - «Check engine» when the engine is running, indicates a malfunction. At the same time, the electronic engine management system automatically switches to...