You will need a screwdriver.
Follow the steps below to replace the side turn signal bulb.
1. Overcoming the resistance of the latch, move the side indicator housing forward in the direction of the vehicle..
2.... and remove the side indicator housing from the hole in the wing along with the sealing gasket.
3. Remove the bulb holder from the side indicator housing..
4.... slide the rubber boot along the wire and remove the lamp from the socket.
5. Install the side turn signal in the reverse order of removal. If the pointer gasket has lost its elasticity or there are traces of aging rubber, replace it.
To replace the front turn signal bulb, follow these steps.
1. Open the hood.
2. Turn the bulb holder counterclockwise and remove it from the turn signal housing.
3. Press the lamp, turn it counterclockwise..
4.... and remove from the cartridge.
5. Install the lamp and socket in the reverse order of removal.