Removal and installation of a steering wheel You will need: interchangeable head "at 24" extension knob Disconnect the wire from the terminal "–" battery. Set the steering wheel to the straight ahead position. 1. Remove the...
Replacing the intermediate steering shaft You will need: interchangeable head "at 24" extension knob keys "on 10", "at 13" Set the steering wheel to the straight ahead position. Remove the steering wheel ( see subsection...
Replacing steering shaft bearings You will need: interchangeable head "at 24" extension knob keys "on 10", "at 13" screwdriver mandrels for pressing and pressing the bearings of the steering shaft hammer...
Tie Rod End — Design Description Tie rod end: 1 - rotary lever; 2 - ball pin; 3 - protective cover; 4 - upper retaining ring; 5 - tie rod end
Tie Rod End Replacement You will need: keys "on 10", "at 19" ball joint pin puller pliers screwdriver Remove the corresponding wheel. If the free play of the steering wheel is increased or the force...
Replacing the protective boot of the ball joint 10. Using a screwdriver, remove the top retaining ring. 11. Remove the protective cover from the hinge. 12. Remove the top layer of dirty grease (if it is noticeable that dirt has...
Removal and installation of the steering mechanism You will need: keys "on 10", "at 13", "at 19" goatee hammer Set the steering wheel to the straight ahead position. Remove the front wheels. When the parts of the steering...
Tie rod replacement You will need: keys "at 19", "at 27", "at 36" screwdriver wire cutters center punch Remove the steering gear ( see subsection 6.5. ). An increase in the free play of the steering...