Car steering repair VAZ-2108

Features of the steering device
Figure 101. Steering The steering consists of a rack-and-pinion steering mechanism and a steering drive. In the tides of the crankcase 18 (figure 101) the steering gear has a...

Possible steering malfunctions
Possible steering malfunctions, their causes and methods of elimination

Checking the steering on a car
At each vehicle maintenance check the condition of the protective cover 11 (see figure 101), caps of the hinges of the 2 rods and the tightness of their fit. They must be replaced...

Removal and installation steering
Place the vehicle on a lift or inspection pit and perform the following operations: lift the hood of the car and, turning the wheels of the car to the right (left), remove the...

Disassembling the steering mechanism
Figure 102. Steering gear parts Clamp the steering gear in a vice with soft jaws. Remove the protective cap 14 (figure 102) and, having unfastened the bolts 24 fastening the inner...

Checking the technical condition of the steering mechanism
The steering gear housing cavities and all metal parts are washed in kerosene. Rubber parts are washed with warm water and wiped with a clean cloth. Carefully inspect for any...

Steering gear assembly
Using mandrel 67.7853.9574 (inner diameter 18 mm, outer diameter 22 mm), press on ball bearing 6 ( see figure 102 ) onto the drive pinion shaft until it stops. Using mandrel...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Chassis: Steering VAZ-2114 (2004-2013)
➠ Chassis: Steering VAZ-2105 (1979-2010)
➠ Chassis: Steering VAZ-21011 (1974-1983)
➠ Chassis: Steering VAZ-2107 (1982-2012)
➠ Chassis: Steering VAZ-2112 (1999-2007)

Share with friends: