Removal and replacing rear suspension parts (VAZ-21061)

We place a hydraulic jack under the rear axle beam. We remove and replace them with new ones one by one (renovated) rear suspension parts.



Using two 19 mm wrenches, unscrew the fastening of the lower (long) longitudinal rods.



Using two 19 mm wrenches, unscrew the fastening of the upper (short) longitudinal rods to the body.



The upper rods are attached to the body side members and the rear axle beam with long bolts with washers and self-locking nuts.



(The original source is published on the website VAZbook.ru)



Using two 19 mm wrenches, unscrew the crossbar mount to the body bracket and rear axle beam.



If it is necessary to repair the body or replace the bracket that mounts the longitudinal lower rod to the body, unscrew the four nuts with a 19 mm head and remove the bracket.



If necessary, we replace the additional compression buffer of the rear suspension.