Features of the driveline device Cardan gear 1 – a bolt of fastening of an elastic coupling to a flange of a secondary shaft of a transmission; 2 – a flange of a secondary shaft of a transmission; 3 - rubber...
Removal and installation of cardan transmission Place the vehicle on a lift or inspection ditch. Chock the front wheels, release the parking brake, and place the shift lever in neutral. Raise the rear axle so that the rear...
Dismantling the driveline 1. Apply marks (paint or core), which determine the relative position of the parts to be separated in order to connect them during assembly in the same position and keep the...
Checking the technical condition of the driveline Front shaft (eccentricity test) 1. Install the shaft in the centers and, turning, check the runout, which should not exceed: on the pipe, at a distance of 70 mm from the end welds...
Balancing cardan shafts The scheme of dynamic balancing of the driveline If parts of the driveline were replaced during the repair, then its balancing is required. Dynamic balancing of cardan shafts in...
Possible malfunctions of cardan transmission Cause Elimination Method Knocking in the driveline when starting off, during sudden acceleration or gear shifting Loosening the bolts and nuts securing the flexible coupling and...