All articles on the device and repair of cardan transmission units of the VAZ-2105 Zhiguli car.
Driveline device Cardan gears are unified on all models. It consists of an anterior 14 (pic. 126) and rear 21 cardan shafts, intermediate support 17, elastic coupling 23 and two cardan joints. The...
Removal and installation of cardan transmission To remove the driveline, place the car on an inspection ditch (lift) and install wheel chocks. Release the parking brake lever, place the shift lever in neutral position, hang out...
Dismantling the driveline Mark after thorough washing (paint or core) on parts to be separated in order to connect them during assembly in the same position and keep the balance of the shafts unchanged....
Checking the technical condition of cardan parts Without disassembly After cleaning and washing the shafts, check the cardan joints for ease and smoothness of turning the forks and for the absence of significant axial and radial...
Cardan assembly Assemble cardan shafts in the reverse order of disassembly, taking into account the following instructions: apply grease FIOL-1 to splined joints; when connecting the parts, align...
Balancing the driveline If parts of the driveline were replaced during the repair, then its balancing is required. Dynamic balancing is carried out on a special stand. At a speed of 5500 min -1 the...