Car driveline VAZ-21214

All articles on the device and repair of cardan transmission units of VAZ-21214 Niva cars and their modifications.

Elements of the cardan transmission
Cardan shafts: 1 – cardan joint flange fork; 2 – front propeller shaft; 3 – cardan shaft tip; 4 – oil seal cage; 5 – oil seal; 6 – sliding fork; 7 – grease nipple; 8 – transfer...

Features of the cardan transmission design
Torque from the transfer case to the front and rear gearboxes is transmitted by cardan shafts. The front and rear cardan shafts are identical in design and differ only in length...

Lubrication of the cardan shaft
Attention! We carry out the work on an inspection pit or lift. We lubricate the splined joint of the sliding fork of the cardan shaft, pumping grease with a syringe through a...

Removal the propeller shaft
Attention! We carry out the work on an inspection pit or lift. Using a 13 mm spanner, unscrew the four nuts securing the rear propeller shaft hinge fork to the rear axle gearbox...

Disassembling the cardan joint
Attention! We disassemble the cardan joint only to replace the crosspiece assembly with bearings. Remove the propeller shaft (see Removal the propeller shaft ). Using round-nose...

Replacing the sliding fork seal
Remove the propeller shaft (see Removal the propeller shaft ). Using a chisel, we move the seal collar along the shaft. We mark the relative positions of the shaft and fork with...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More articles from other manuals on VAZ cars:
➠ Transmission: Cardan gear VAZ-2101 (1970-1983)
➠ Transmission: Cardan gear VAZ-2105 (1979-2010)
➠ Transmission: Cardan gear VAZ-2107 (1982-2012)
➠ Transmission: Cardan gear VAZ-2106 (1976-2006)

Share with friends: