2. Disconnect the wire from the negative battery terminal (see "Battery - removal and installation").
3. Using a thin slotted screwdriver, pry off the insert and, having released the latches, remove it from the hole in the radio receiver panel.
4. Disconnect the wire blocks from the terminals of the lamp socket.
5. Turning 90°counterclockwise, remove the cartridge together with the lamp.
6. We replace the lamp together with the cartridge.
7. To remove the instrument lighting regulator, pulling, disconnect the handle.
8. Using a 21 mm socket wrench, unscrew the plastic nut securing the regulator.
9. Remove the regulator from the panel insert.
10. Disconnect the regulator wire block.
Installation
The installation of the regulator and the upper insert is carried out in the reverse order.