Remove the switches from the instrument panel and disconnect the wires from the switches for the rear window wiper, rear window heating, fog light, hazard warning lights, exterior lighting switches, and interior heater electric fan. Remove the instrument cluster (see section. "Electrical equipment"), the cigarette lighter and disconnect the electrical wires from them. Unscrew the two screws securing the heater control lever bracket. Press the hooks of the right pipe 4 (figure 185) deflector 3, remove the pipe together with the deflector. Remove the ashtray 6 or plug 5. Unscrew the two fastening nuts and remove the fuse box from the studs.
Unscrew the self-tapping screws 7 from the brackets 8 for fastening the instrument panel 2 and remove the panel together with the trim 1. The points of fastening of the instrument panel 1, 2 to 3 are shown in Figure 186. Access to the screws at points 1 is provided under the instrument panel, at points 2 - with the instrument clusters and the right deflector pipe removed.
[The original source is located on the website: VAZbook.ru]
The installation of the instrument panel is performed in the reverse order. Before installation, check the condition of the spring clips and self-tapping screws.