Contents: Removal ↓ Installation ↓
Removal
1. Remove the engine oil pan from the vehicle (see "Engine Oil Pan - Removal").
2. Using a 10 mm wrench, unscrew the two bolts (1) securing the oil receiver to the main bearing cover and the bolt (2) securing the oil receiver to the oil pump housing.
3. Remove the oil receiver, removing its tube from the oil pump channel.
Note: The connection between the oil receiver and the pump is sealed with a rubber ring. Replace a damaged or loose sealing ring.
Installation
We install the oil receiver and all removed parts on the car in the reverse order of removal.
Warning: The bolt that secures the oil receiver to the oil pump is longer than the bolts that secure it to the main bearing cap.