You will need: key "on 10".
Disconnect the wire from the terminal "–" battery.
Drain the oil from the engine crankcase.
Remove the engine oil sump (see subsection 10.4.4.).
1. Loosen the three oil pan mounting bolts (flat washers under the bolts) And...
2.... remove the oil receiver.
3. Remove dirt and rinse the oil receiver mesh with white spirit. If the screen cannot be cleaned or is damaged, replace the oil receiver.
4. Install the oil receiver in the reverse order of removal, after replacing the torn or loose sealing ring. Pour oil into the engine crankcase.